top of page

Fix your pc needs to be repaired error 0xc0000225 on windows 10

Laptop won’t start after windows 10 1809 update? Getting error code 0xc0000225, your pc needs to be repaired (A required device isn’t connected or cannot be accessed). The most common cause of the error code 0xc0000225 is the Boot Configuration Data BCD file has become missing or corrupt.

Also sometimes system files are corruption, faulty hardware device or driver confliction results Error Code 0xC0000225 Your PC needs to be repaired, A required device isn’t connected or can’t be accessed Or An unexpected error has occurred.

For some Other users, the error code will different like

  1. 0xc000000f – An error occurred while attempting to read the boot configuration data

  2. 0xc000014C – The Boot configuration data for your PC is missing or contains errors

  3. 0xc0000225 – Boot selection failed because a required device is inaccessible

  4. 0x0000098, 0xc0000034 – Boot Configuration Data file missing required information or does not contain a valid OS entry.

So If you are also struggling with this error code 0xc0000225, Unable to boot windows normally. here some effective solutions to apply.

Contents

Fix Error Code 0xC0000225 in Windows 10

Disconnect all peripheral devices from the computer except the keyboard and the mouse. Restart Windows, and check this may fix the problem if the device driver compatibility issue causing the problem.

Since windows fail to start normally, You need to use installation media, such as a USB flash drive, or a disc, to proceed some of the following methods. If you don’t have one, here is how to create Windows 10 installation media.

Windows 10 startup repair

  1. Insert your installation media, (USB flash drive, or a DVD). Then restart your computer.

  2. Access BIOS setup using F2 or Del key then change first boot from removable Disk or DVD

  3. Press F10 and yes to make save changes and restart PC

  4. Now System start from installation media “Press any key to boot from CD or DVD“.

  5. Confirm your language options, then click Next.

  6. When you see the Install now screen, click the Repair your computer link in the bottom-left instead.

Repair your computer
  1. Select Troubleshoot then Advanced options.

  2. Click Automatic Repair.

Advanced options
  1. This will restart the window and during startup, this will start to diagnose your system.

  2. During this diagnostic phase, Startup Repair will scan your system and analyze the various settings, configuration options, and system files as it looks for corrupt files or botched configuration settings.

  3. Let the process go through, then restart your computer when it’s done.

  4. If error code 0xc0000225 doesn’t pop up, you’ve fixed the issue!

Repair Corrupt boot Volume ( MBR )

If Windows’s automatic repair didn’t work, try to rebuild Boot Configuration Data file from Command Prompt.

  1. Boot from your Windows 10 installation media and open the Advanced options menu.

  2. choose Command Prompt to open a command line interface.

  3.   Diskpart

  4.   List volume

Note down your windows installation volume

Now Type Exit

The above listed commands help you to find out the Windows Drive Letter that is going require treatment. This is essential to understand the part of our windows Drive Letter that requires the troubleshooting process.

Now Perform Bellow commands to fix :

  1. First Type D: ( Note your driver letter may different ) and hit the enter key.

  2. Perform bootrec /scanos command to scans your disk(s) for compatible installations, which can help it find your “missing” Windows installation.

  3. Type bootrec.exe /fixmbr hit enter to fix the master boot record.

  4. After that type bootrec.exe /fixboot hit to fix the boot device related problem.

  5. Now Use command bootrec.exe /rebuildbcd and hit enter to scans again for Windows installations after the fixes.

Fix Corrupted Boot volume

When the commands finish running, restart your computer and see if the error code: 0xc0000225 happens again.

Set your Active Partition

By setting your active partition, you are telling your system where to boot from. However, for some reason, the active partition may switch to the wrong one, prompting the error code 0xc0000225 to appear. Thankfully, you can always change that and point your system to the right partition. Here are the steps:

  1. Again, you’ll need your Windows installation media to boot your system.

  2. Once you see the Windows Setup screen, select your preferred language and click Next.

  3. Click the Repair your Computer link at the bottom-left corner of the Install Now window.

  4. Open the Command Prompt via the Advanced Options menu by following this path:

Troubleshoot ->Advanced Options->Command Prompt

  1. Open the Disk Partition tool by running these commands one by one:

diskpart

list disk

  1. Once you’ve run these commands, you will see different Disk entries. It is likely that your hard drive is Disk 0. Run the following commands one at a time, replacing ‘X’ with the number of your HDD:

select disk X

list partition

Note: The second command allows you to see all the partitions on your internal drive.

  1. Run the following commands, replacing ‘X’ with the number of your partition:

select partition X

active

  1. Close Command Prompt, then boot your system normally. Check if the error 0xc0000225 has been resolved.

Disable Driver Signature Enforcement permanently

Also Sometimes Driver signature enforcement can cause this type of problems. We recommend to once disable the Driver signature enforcement and start windows. May this option work for you. To do this Access the command prompt from advanced boot options and type below commands one by one and hit enter key.

bcdedit -set loadoptions DISABLE_INTEGRITY_CHECKS bcdedit -set TESTSIGNING ON


Reboot your computer and check windows started normally. If you want to enable signature enforcement in the future, then open Command Prompt (with administrative rights) and type these commands in order:

bcdedit -set loadoptions ENABLE_INTEGRITY_CHECKS bcdedit /set testsigning off

If none above solutions work for you, access advanced options and perform system restore. Pick a recent restore point and Windows will return to that point without affecting your personal files.

Did these solutions help to Fix error code 0xc0000225, your pc needs to be repaired windows 10? Let us know on comments below, also read:

Featured Posts
Recent Posts
Archive
Search By Tags
Follow Us
  • Facebook Basic Square
  • Twitter Basic Square
  • Google+ Basic Square
bottom of page